Kit mdf & gel

Telecharger fiche technique



1 – Description:

An adhesive set which consists of high viscosity cyanoacrylate adhesive and activator.

2 – Properties:

  • High bonding strength.
  • Suitable for use on vertical surfaces as it will not drip or slump.
  • It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface.



  • It is suitable for the bonding of a very wide range of materials, including acidic surfaces and some porous ones, where rapid bonding times are required.
  • Suitable for MDF, wood, chip wood, rubber, most plastics, leather and other common substrates.
  • Especially suitable for the applications where cure speed needs to be accelerated.
  • Although Akfix 705 has a degree of gap filling ability, it is generally recommended for use on close-fitting parts and fairly smooth, even surfaces.


4 –Instructions:

Substrates need to be smooth and have a perfect connection area. Apply a drop on one of the substrates. Join substrates and press firmly for one minute. Application temperatureisbetween +5°C and +35°C.

5–Packaging :

Product Volume/Weight Package
Activator& Glue 100 ml + 25 gr 48
Activator& Glue 200 ml + 65 gr 24
Activator& Glue 250 ml + 65 gr 24
Activator& Glue 400 ml + 125 gr 24
Activator& Glue 500 ml + 125 gr 24



6–StorageandShelf Life :

12 months in unopened packaging in a dry and cool storage place at temperatures between +5°C and +25°C.



  • Cyanoacrylates should ideally be stored in original sealed containers until used.
  • Avoid exposure to strong light and heat sources
  • Cyanoacrylates can bond to skin within seconds
  • Do not drip into skin or into eyes – can cause serious injury to your eyes.
  • Will become hard in container if not closed properly!
  • Activator is flammable. Do not throw into fire. Do not inhale.
  • Activator box is pressured. Do not crush or drill.


8–TechnicalProperties :

  • Glue


Basis : Ethyl Cyanoacrylate
Appearance : Liquid gel
Color : Colorless
Application Temperature : +5°C to +35°C
Density : 1.06 ± 0.01 gr/cm3 ASTM D1875
Flashpoint : > 81 ° C
Viscosity : 1200 – 1800 Cpsat 25°C ASTM D1084
TemperatureResistance : -20oC to +70 oC


  • Activator
Basis : Hexane
Appearance : Aerosol
Color : Colorless
Application Temperature : +5°C to +35°C
TemperatureResistance : -20oC to +70 oC


There are no reviews yet.

Be the first to review “Kit mdf & gel”

Your email address will not be published. Required fields are marked *